Broom-finish concrete driveways run $7-$11 per square foot, and the permit decides when we can start, not what the square footage costs. Send us your address and a rough length and width. You'll get a typical range on the call. The exact number is built on your actual footprint once we've seen the job, and we'll flag whether the road edge needs a permit before anything goes on the schedule.
What a square-foot price means for your driveway
Broom-finish concrete driveway installation runs $7-$11 per square foot. That covers the finished surface: forms set to the shape of the drive, welded-wire mesh, concrete placed and screeded to the required thickness, then floated and broomed. The total follows your footprint, not the number of cars you own.
To estimate your own, multiply length by width in feet. If the drive widens near the garage or curves, break it into rectangles, measure each, and add them up. Measure the outline of the old drive you want replaced, plus any strip you want added.
Treat that as a planning number, not a quote. The written quote comes next, with the final price on paper before we set the first form.
Often paired with concrete patio installation. Need a concrete contractor in Fort Myers? Start on our home page.
Helpful next: What Happens During Concrete Work: The Steps Explained · Comparing Concrete Work Quotes: What Is Worth Checking
Why one driveway lands at and another at
Four things separate the low end from the high end: thickness, forms, mesh and finish. We screed the concrete to the thickness the driveway requires, and more thickness means more concrete in every square foot.
Form work is the next variable. Straight edges on wood or metal driveway forms go up quickly. Curves, tight turns and stepped edges mean more labor building the forms, so those feet cost more than a straight run. The welded-wire mesh is a material and labor line in every driveway quote we write.
The range is built on a broom finish. If you want a different surface, tell us up front and we'll price it separately instead of stretching the broom-finish number to cover it.

The county permit and the apron at the road
In unincorporated Lee County, driveway work in the public right-of-way can't start until the county permit is issued. The permit comes first, then the crew, then the forms at the road edge.
A drive that meets the road gets an apron, and we price it into the quote from the first number we give you.
The address is enough for us to say whether the county rule reaches your property. The permit isn't something you have to sort out before you call.
Pour day, broom texture, and when you can drive on it
Pour day moves fast, and it only works because the forms and mesh are ready beforehand. The concrete goes evenly into the forms and gets screeded level to the required driveway thickness. Then we bull-float the surface.
The broom texture goes on last, and only after the bleed water has dissipated. So there's a stretch where the crew stands around waiting on the concrete. That wait is correct.
We'll tell you on pour day when the slab is ready for cars. Keep vehicles off it until then, and that includes the apron.
Is the old driveway past patching?
A patch is worth doing when the damage is limited to a single crack or corner and the remaining panels are still solid. Replacement makes sense when the damage is everywhere. Look for cracks across most of the panels, sections that have sunk or tilted so they no longer sit level with their neighbors, and a surface that's crumbling or flaking instead of just stained.
A patch only repairs the spot it's applied to. If the slab around it is moving or breaking up, a new crack will open beside it. Standing water where it never used to collect, or edges that have broken away along the forms, tell the same story.
Not sure which camp your drive is in? If it comes to replacement, the length and width of the slab turn straight into a written quote.
You Might Also Need
Pieces of the Work
In detail, expect steps like these:
- Elevate wire mesh or rebar using chairs or blocks so the steel sits embedded within the concrete rather than on the dirt.
- Pour concrete evenly across the forms and strike it off level to achieve the correct driveway thickness.
Straight Answers
A conversation on the phone is the easiest start, and you decide what happens next.
Estimates · No-pressure scheduling