Free Estimates ยท No obligation Proudly serving Fort Myers and North Fort Myers(239) 327-0168
Riverbend Concrete Contractor Co.Fort Myers, FL (239) 327-0168

What to Compare Between Concrete Work Quotes (2026)

If your driveway, patio or walkway has sunk, cracked through, or started coming apart in chunks, patching won't hold and the old slab has to come out.

Questions Welcome

Illustrative image of concrete contractor hiring guide work

Get an Estimate

No obligation

Call (239) 327-0168

From here

  1. Share a few details
  2. You get a callback
  3. Ask anything, no obligation
Preferred time (optional)

A local specialist will follow up by phone soon.

We pass the details you provide to a local provider so they can reach out about your request, and we don't sell your information. See our Privacy Policy.

Providing your phone number means we, and the local provider we connect you with, may text you about your request. Consent is not a condition of purchase. Message frequency varies; msg & data rates may apply. Reply STOP to opt out, HELP for help. See the SMS section of our Privacy Policy.

We handle the whole replacement, from tearing out the failed concrete to setting forms, placing rebar and finishing the new surface. Tell us roughly how big the area is and what it's doing, and you'll get a ballpark range on that first call. We then measure on site, and the firm price arrives as a written quote before any digging starts.

What does a new slab cost in Fort Myers?

The spread comes from four things: the square footage, the reinforcement the slab needs, the finish you pick (a broomed surface and a steel-troweled one are different labor), and how hard the site is to work. Tight access and soft, wet ground that needs extra base work add cost. A wide-open, dry, flat area pushes you toward the bottom.

Square footage, reinforcement and finish each get their own line on our quote, and changing the size or the finish moves only that line.

For the hands-on side, see concrete driveway installation. Want a concrete contractor in Fort Myers? Our home page covers it.

Why does the ground here break slabs, and what do we do about it?

The soil under most Fort Myers slabs drains slowly, and that's where the trouble starts. Canaveral fine sand is the dominant soil near here, and water leaves it slowly. Low elevations and high groundwater in the Caloosahatchee watershed add to localized flooding. Water that sits in the base softens it, and a softened base lets the slab settle and crack.

So on a replacement we pay as much attention to the base and the final heights as to the concrete. The water table can affect excavation and base preparation, so we check how wet the ground is when we dig out the old slab. Finished elevations matter because the slab has to shed water, not collect it. The forms and stakes set the height and the slope so rain runs off to where you want it.

Representative illustrative image of concrete contractor hiring guide work photo

How is the new slab placed and finished?

The pour follows a set order, and each step has a job. After the old slab is out and the base is ready, we place rebar reinforcement and set the forms. Then we pour and screed the surface level. Next the bull-float goes over the surface to level out the humps and dips and press the coarse aggregate below the top.

We wait until the surface moisture sheen disappears, then float the concrete. Then comes the finish: a steel trowel for a smooth surface, or a broom pulled across it for texture. Texture is the better pick for a driveway or any walkway that gets wet, since it grips underfoot. Last come the contraction joints, tooled in or sawcut, which tell the concrete where to crack. For a driveway poured 4 inches thick, joints typically run no more than 10 feet apart and about one-quarter of the slab thickness deep.

When should the pour be scheduled?

Rain is the main scheduling problem here. About two-thirds of Fort Myers' annual rainfall comes from June through September, often in heavy thunderstorms. A downpour can wash out fresh concrete, and it can also soak a base that was ready the day before. Pours get planned around the wet season, and the forecast decides the day; if a storm line is coming, the date moves. If your slab has failed in summer, you can still book the work, but expect that a rainy week may push the date.

What happens when you call us?

The first call is mostly a conversation about the slab. Expect questions about where it is, its approximate size, and what it's doing: sunk, cracked through or breaking in chunks. That's enough for a ballpark from the $3.50 to $16 or $7 to $18 ranges, and the firm number comes after we've seen the site. If replacement makes sense, we'll set a time to come out, measure, and look at the ground under and around the slab.

You don't have to choose reinforcement, finish or thickness on that call. We go through those on site, then send the written quote with the square footage, the reinforcement and the finish spelled out.

Do you need a new slab, or will resurfacing do?

If your slab is still flat and in one piece and only the top is worn, resurfacing may be all you need, at about $2.50 to $4.50 per square foot. It won't help if the slab has sunk or cracked through, because those problems come from the ground below. We look at the slab before we recommend anything. If it can be saved, we'll say so, and you won't pay for a replacement you don't need.

What It Typically Costs

Read these as planning figures, and we'll explain what moves a price up or down.

Exposed aggregate concrete finish

$7–$11 per square foot

Stamped concrete paving

$8–$20 per square foot

Polished concrete floor finishing

$1.80–$14.50 per square foot

You Might Also Need

Questions Welcome

A few minutes on the phone covers most of it, no pressure, no obligation.

Estimates · No-pressure scheduling

Updated November 2026

← More concrete work around Fort Myers